Heating element guides
Short guides for anyone replacing MoSi2 or SiC heating elements: what the furnace and element makers write, with a source for each statement, and what to check before you order.
Last updated 20 October 2026
Guides
Looking for one furnace? See dental furnace heating elements by model. How a request works: check first, then quote.
By furnace model
Six dental sintering furnaces, each with what its maker documents about the heating elements.
Programat S1 / S1 1600
Cleaning firings, Service Hint 1700, and when Ivoclar recommends new elements.
Details and sources →Dentsply SironainFire HTC speed
Six MoSi elements, the resistance check and the counter reset after a replacement.
Details and sources →ShenpazSintra / Sintra Plus
Three elements; Shenpaz recommends changing all three after 2,000 working hours above 500 °C.
Details and sources →NaberthermLHT 01/17 D / 03/17 D
Molybdenum disilicide elements, the oxide layer and the oxidation firing after a change.
Details and sources →VITAZYRCOMAT 6000 MS
Four elements, item D53041, and the cleaning firing that restores the oxide layer.
Details and sources →ZirkonzahnZirkonofen 600
Two MoSi2 elements, item ERAA0331, and where the terminal block sits.
Details and sources →Request a quote
Send the part number, or a photo of the old element with the dimensions. We reply by email with the size line we read and anything missing.