SiC and MoSi2 heating elements
Six elements: dental MoSi2 4/9 and 3/6, dental-furnace SiC thin and SGR spiral rods, MoSi2 U 6/12, and SiC rods Ø25 in U type and straight. Each page shows photos, a dimension drawing and what to send. Not sure which one you have? Start from your furnace type. Other sizes: send the part number.
SiC heating rods (silicon carbide)
Straight and U-type rods Ø25, plus thin rods and SGR spiral rods for dental furnaces.
SiC · kilns & furnacesSiC rod Ø25, straight
OD25 × HZ × CZ × OLStraight silicon carbide rods: hot zone in the middle, cold ends at both sides.Sizes & what to send 
SiC · kilns & furnacesSiC rod Ø25, U type
U OD25 × HZ × CZ × ATwo legs joined by a bridge, both terminals on one side of the furnace.Sizes & what to send 
SiC · dental furnacesDental-furnace SiC: thin & SGR spiral rods
SGR OD × HZ × OL × ΩFor dental furnaces that heat with SiC; checked against the furnace model and the old element.Sizes & what to send MoSi2 heating elements (molybdenum disilicide)
U elements 6/12 for lab and industrial furnaces, and the small 4/9 and 3/6 sizes for dental sintering furnaces.
MoSi2 · industrial & lab furnacesMoSi2 U element 6/12
6/12 × Le × Lu × aU-shaped molybdenum disilicide elements for high-temperature electric furnaces.Sizes & what to send 
MoSi2 · dental furnacesDental MoSi2 4/9
4/9 × Le × Lu × aSmall U elements of the size many dental sintering furnaces use; checked by furnace model.Sizes & what to send 
MoSi2 · dental furnacesDental MoSi2 3/6
3/6 × Le × Lu × aThe smaller size, used in fewer furnaces; always checked against the old element.Sizes & what to send Dental furnace models and guides
Not sure which element is in the furnace? Start from the furnace model, or measure the old element.
Request a quote
Send the part number, or a photo of the old element with the dimensions. We reply by email with the size line we read and anything missing.